CELOS

Contoh Kasus Pelanggan

  • Contoh Kasus Pelanggan 2018/12/17 UP
  • Print

Nakahara Works Co., Ltd.

Ask the Master of
“Parts Machining” x “5-axis Control Machine” Vol.1
Why did they choose 5-axis control machine for machining mass production parts?

シェア

Why did they choose 5-axis control machine for machining mass production parts?

Nakahara Works, specialized in rolling, boasts the top share of the roller market in Japan. A roller is a key component of printing machines such as a rotary press. As rolling requires high accuracy to ensure balance for stable and high-speed rotation, the company employs a technology called pressure welding to connect pipes and axes. They used to use a portal type 5-axis machining center to manufacture printer parts, but now employs a simultaneous 5-axis control machine. “In my thought, we did not need a simultaneous 5-axis control machining center because what we were handling at the time were mass-production parts,” recalls President Kenichi Nakahara. Then what brought him to change his mind?

(From left) Mr. Kotaro Nakahara(Director / Chief of production department), Mr. Kentaro Nakahara(Director / General manager of development and technology department), Mr. Yuto Doi, Mr. Tatsuya Omori and Mr. Ryunosuke Kajiyama(Production department) in front of the DMF 180|7 linear

This content is for members only

The bookmark function is a service restricted to members.
To use it, you must register as a member and log in.